|Dimensions||46 × 27 × 2 in|
The stamped concrete is so versatile that with the help of the BLENDER MATS® line, you can create a variety of surfaces Whether for residential, commercial and industrial construction. The BLENDER MATS® line is used by the experts in stamped concrete, since with them they can create surfaces with appearances of great beauty and realism both indoor and outdoor areas.
The BLENDER MATS® line offers more than 50 different designs that are able to transmit the most real aspect of different natural textures, such as stones, rocks, bricks among many more surfaces.
|Dimensions||46 × 27 × 2 in|
− Extremely durable and resistant.
− Excellent elasticity with exceptional elastomeric memory.
− Excellent resistance to impact, shear and tear.
− It does not shatter like rubber.
− Wide working temperature range -22°F to 250°F (-30°C to 121°C).
− Flexible mats will maintain their flexibility below 32°F (0°C). The rigid mats will maintain their flexibility even above 250°F (121°C).
PRESENTATION AND PERFORMANCE
You can find the BLENDER MATS® individually, but the six molds kit (5 rigids and 1 flexible) is recommended to achieve a significant and correct stamping.
The performance of the BLENDER MATS® is variable, since the quantity of the impressions obtained will depend on the design, use and maintenance given to the product.
Hardness (ASTM D2240):
|Flexible mold||40-42 (Shore A)|
|Rigid mold||60-62 (Shore A)|
Area preparation: All surrounding areas should be protected from being stained by the dust resulting from the application method, it is advisable to cover with plastics.
Slab preparation: After applying all BLENDER COLOR HARDENER® or BLENDER RECOVER® and no longer bleed, complete the flatness to obtain a smoother surface, once this happens apply the BLENDER RELEASE AGENT® slightly over the surface by spreading it manually in ranges or similar volumes and always approaching no more than 16 in (40 cm) from the surface to avoid loss of product performance.
Stamping: Immediately afterwards place the selected BLENDER MATS® on the surface respecting the direction and order of the kit. Apply pressure evenly to achieve the correct engraving; remove the mat. It is recommended to use a Blender tamper to achieve a uniform and correct printing on the concrete.
The mat should not be in contact with aggressive solvents (Dimethylformamide, thinner, acids), if so, must be for short periods and immediately wash it with soap and water (It is recommended to use a plastic bristle brush).
After using the molds should be cleaned with soap and water to remove the remaining release agent, it is important to note that they should be thoroughly rinsed to remove excess òf soap.
The BLENDER MATS® do not pose any risk during use and / or handling. As a plastic material, avoid keeping it near sources of ignition.
Do not expose them directly to the sun’s rays or heat sources that could deform them. Store them indoors in a cool and dry place, so they can be placed on top of each other as long as it is on a flat surface that prevents them from bending or deforming.
This product, its materials and its manufacture are warranted to be free from defects under the quality control standards in accordance with Blender Group®, S.A. de C.V.
All recommendations, statements and technical data attached are based on evidence that we believe to be reliable and correct, but the accuracy of such evidences are not guaranteed and does not provide any guarantee, expressed or implied, including warranty of appropriate use or market respect to its products. Satisfactory results depend on many factors that go beyond Blender Group® control.
The user must rely on his own information and tests to determine the suitability of the use of the product, and user assumes all risk, loss, damage, expense and liability resulting from his direct or indirect use, or the consequences of product use. Blender Group® shall not be liable for injury, loss or damage to purchasers or third parties injured by direct or indirect use resulting from the use or inability to use the product.
The sole responsibility of Blender Group® is to replace that portion of the product that proves to be defective. Any claim for warranty must be made within six (6) months from the date of the claim. This limited warranty applies only if the product was properly installed and used in accordance with the instructions and stored properly prior to use.
For professional use only.